Universal 2mm Pitch Pin Header Board Single Row Electrical Connector

0.8*1.2mm Board Spacer Dual Row SMT

2.00mm Pin Header Board Spacer Single Row Straight Right Angle

Pin header is a type of electrical connector, this connectorare widely used in electronic or instrumentation of PCB (Print Circuit Board) function as bridge between two PCBs which were blocked, and used to take current or signal transmission

Normally pin headers are pin through hole (PTH) type, but surface-mount technology (SMT) versions of one and two row pin headers also very typically.In the latter case the solder sides of the pins are simply bent on a 90 degree angle so as to be soldered to a solder plane. On single row pin headers the pins are bent alternating to one side or the other, on dual row pin headers the pins are simply bent outwards. If pin headers are optional, the PTH variant is often chosen for ease of manual assembly. Pin headers can be either straight or angled. The latter form is often used to connect two boards together.

SPECIFICATION:

1. Rated Current: 1.5AMP

2. Contact Resistance: 20mΩ Max

3. Withstand Voltage: 500V AC/DC

4. Insulation Resistance: 1000mΩ Min

5. Operation Tempature: -40℃-+105℃

6. Contact Material: Brass

7. Contact Plating: Au or Sn over 50 u" Ni

8. Insulator Material: Polyester(UL94V-0)

9. Stand: PA6T

10. Max.Processing Temp: 230℃ for 20-30 Seconds(260℃ for 10 Seconds)

1320-21XXXNXXRXXXX01.pdf

Primary products:

Pin Header Connector

Female Header Connector

Box Header Connector

Ejector Header

Board To Board Connector

DIN 41612 Connector

Flat Ribbon Cable

FFC Cable

Terminal Block Connector

SCSI Connector

Machine Pin Headers

Mirco Match Connect

IDC Socket Connector

SIM Card Socket

Card Edge Connector

Wafer Connector

SATA Connector

Power Connector

Wiring Harness

COMPANY INTRUDUTION:

To provide high quality and best performance-to-price ratio products from customers,we have realized integrated production from the plastic and hardware terminals,design and development of mold,precision plastic ejection molding and high speed precision hardware punching,and automatic assembly of the products,to implementation of one-stop production and service.

we based on the domestic and aiming at the world,Striving to provided customers with high-quality and best-price products.The company has passed the ISO9001:2015quality management system certification and ISO14001:2015 environmental management system certification,IATF 16949 system certification and passed CE certification and TUV certification. Connectors and wires of our company has passed United States UL safety certification.(UL NO.: E362810) and (UL NO.: E472355),terminal blocks(UL NO.:E484895).

Production Capability:

The factory with area of 20,000 square meters and has about the total number of employes 600 people and owns 30 sets precision mold processing equipment from Taiwan, 34 sets precision plastic injection machine from Taiwan& Japan, as well as 24 sets high –speed precision punch, more than 500 sets various types of plastic molds and more than 240 sets hardware terminal molds,35 sets laboratory testing equipments and over 200 sets machines for automatic assembly that can provide customers with over 10 sorts and 20,000 different specification connectors parts, company handles import-export rights. and up to 40% products are exported to Euro-American countries.

Complete Testing Equipment:

To provide high quality and best performance -to -price ratio production for customers, we have realized integrated production from plastic and hardware terminals, terminals,plating, design and development of mold, precision plastic ejection and molding and high speed precision hardware punching, to the automatic assembly of products.

Certifications:

The company main ten series products obtained American UL & CUL certification, with the No. E362810 and No.E472355, E484895(terminal block). All items are in line with EU RoHS and REACH environmental requirements

FAQ:

Q: What is the MOQ?
A: Our MOQ is: 1000 PCS(1 PCS for sample).

Q: How about samples? is it free ?

A: 20 Piece free sample is available, If you would like to pay the freight fees.

Q: What is your price term & payment terms?

A: 1. Our usual price term is EXW,FOB Shenzhen or FOB Hongkong, but other terms is available too. 2. Payment terms: T/T, Paypal and other terms.

Q: Do you have UL certificate? and others?

A: Of course, we have , and also qualified SGS, ISO9001:2008, ISO14001:2004 etc.