|Place of Origin:||China|
|Minimum Order Quantity:||500pcs|
|Packaging Details:||Tube packing/PE bag packing|
|Delivery Time:||5-8 days|
|Payment Terms:||T/T, L/C, Western Union|
|Insulator Material::||Polyester LCP/PA9T||Rated Current:||3 AMP|
|Withstand Voltage:||200VAC/DC||T&R Packing Qty:||1000pcs|
|Contact:||Phosphor Bronze||Surface Treatment::||AU Over Ni|
|Number Of Pins:||10~100p|
PA69T Insulator PCB Header Connector,
1.0mm Pitch PCB Header Connector,
H3.5 Smt Header Connector
1.0mm Pitch H3.5 SMT Type 16P PA69T Insulator Box Header Connector for PCB
|Contact Material||Brass Gold plated|
|Contact Plating||Gold plated|
|Withstanding Voltage||1000V AC/minute|
|Insulation Resistance||1000MΩ Min|
|Package :||Reel packing/tube packing/ bag packing|
|Max ProcessingTemperature:||-230 ℃ for 30~60S (260℃ for 10S)|
|Contace Resistance:||20 MΩ Max|
The factory with area of 20,000 square meters and has about the total number of employees 600 people and owns 30 sets precision mold processing equipment from Taiwan, 34 sets precision plastic injection machine from Taiwan& Japan, as well as 24 sets high –speed precision punch,
Complete Testing Equipment:
What factors should be considered when build the connectors in PCB board?
1. Design of printed board The terminal number is should displayed on the connector.
2. When welding, observe the following welding conditions. 260 ℃ within 10 seconds 300 ℃ Within 5 seconds 350 ℃ Within 3 seconds.
3. Because there is no stress relief device in the PCB type connector, please leave a sufficient margin for the cable length to prevent the cable from being affected by the external force.
4. If the terminals are repeatedly bent, the terminals may be broken, so please be careful.
5. When the cover is assembled into the base or when it is removed, if the edge of the cover is excessively displaced, it may cause damage, so please be careful.
6. For cable crimping tools, use special tools for cable cutting tools and crimping tools.